What is Equity Dilution?

Equity dilution refers to the reduction in existing shareholders’ ownership percentage due to the issuance of new shares. Although it doesn't necessarily mean a loss in actual monetary value, it does mean reduced voting power, ownership stake, and potential control over the company.

For example, if a founder owns 50% of a company before a funding round and 40% after new shares are issued to investors, the 10% drop is equity dilution.

Causes of Equity Dilution in India

Several scenarios in India lead to equity dilution:

• Fundraising through equity: When a company raises capital by issuing new shares to investors (angel, VC, PE).
• ESOPs (Employee Stock Option Plans): Issuing shares to employees for retention and motivation.
• Convertible instruments: When convertible debentures or notes convert to equity.
• Mergers and acquisitions: New shares issued as part of a transaction.
• Bonus or rights issues: Depending on the structure, these can also dilute holdings if not proportionally subscribed.

Impact of Equity Dilution

Dilution can affect stakeholders in various ways:

• Founders: Loss of control or voting power if too much equity is given away early.
• Investors: Reduced ownership percentages, which may affect decision-making influence.
• Employees: If ESOPs are diluted too often, their potential upside gets reduced.
• Company valuation: Though dilution reduces percentage ownership, it can lead to growth and higher valuations, offsetting the effect in monetary terms.

How Does Share Dilution Happen?

Share dilution occurs when a company issues additional shares, reducing the ownership percentage of existing shareholders. While the total number of shares increases, each existing shareholder’s slice of the pie becomes smaller — unless they participate in the new issue.

Here are the most common ways share dilution happens in India:

1. Fundraising (Equity Rounds)

During seed, Series A, or later funding rounds, new investors are issued fresh equity. To accommodate them, the company increases its authorised and paid-up share capital, diluting the percentage held by existing shareholders.

Example:
A founder owns 100% of a startup with 1,00,000 shares. After raising funds from investors who are issuing 50,000 new shares, the founder’s ownership drops to 66.67%.

2. Issuing ESOPs (Employee Stock Option Plans)

Startups often set aside 5–15% of their cap table for ESOPs to attract and retain top talent. These options, once vested and exercised, convert into shares — reducing the percentage stake of other shareholders.

3. Conversion of Convertible Instruments

Instruments like convertible notes, SAFE (Simple Agreement for Future Equity), or CCDs (Compulsorily Convertible Debentures) convert into equity at a future date. When they convert, new shares are issued, which dilute existing ownership.

4. Mergers or Acquisitions

In some mergers or acquisitions, equity may be offered as part of the consideration to the merging entity or its shareholders. This leads to the issuance of new shares and causes dilution.

5. Bonus Shares to Select Stakeholders

Occasionally, a company might issue bonus shares to certain shareholders or employees as incentives, which can result in uneven dilution.

Reasons for Equity Dilution

• Capital infusion: To fund growth, R&D, hiring, marketing, etc.
• Strategic partnerships: Issuing equity to partners or advisors.
• Debt conversion: Debt turning into equity through convertible notes.
• Regulatory compliance: SEBI regulations may require public companies to maintain a certain free float, triggering new issuance.

Managing Equity Dilution in India

Equity dilution is inevitable as your startup grows — but managing it smartly can protect both your control and long-term value. Indian founders must understand the tools, strategies, and legal frameworks available to reduce unnecessary dilution and align all stakeholders.

1. Plan Your Cap Table Early

Create a 5–7 year cap table projection. Visualise future funding rounds, ESOP pools, convertible instruments, and expected dilution at each stage.

2. Raise What You Need, Not What You Can

Avoid over-raising in early rounds. Each round of funding comes at the cost of equity. Only raise what’s required to hit the next set of milestones.

3. Negotiate Better Valuations

Valuation is key to how much equity you give up. Strengthen your fundamentals, traction, and pitch to negotiate higher valuations, thus minimising dilution per rupee raised.

4. Use Convertible Instruments Strategically

Instruments like SAFE notes or CCDs can delay dilution until a priced round. Use them in early or bridge rounds to preserve equity while bringing in capital.

5. Be Thoughtful with ESOP Allocation

ESOPs are critical to building a strong team, but don’t over-allocate too early. Start with a lean pool (5–10%) and expand as your team grows and funding allows.

6. Include Anti-Dilution Provisions (If You're an Investor or Co-Founder)

While often investor-friendly, certain anti-dilution clauses can protect your equity in down rounds. Founders should understand these clauses and negotiate fair terms.

7. Consider Non-Dilutive Capital

Explore grants, government schemes (like Startup India Seed Fund, MeitY TIDE, or NIDHI), or revenue-based financing. These options offer capital with no equity dilution.

8. Maintain Founder Alignment

If co-founders have significantly unequal stakes, align expectations early. Future dilution can compound tensions if not addressed at the start.

How Shareholders Can Handle Equity Dilution?

• Pre-emptive rights: Ensure agreements include rights to participate in future rounds to maintain shareholding.
• Anti-dilution clauses: Particularly for investors, these can protect them from value dilution in down rounds.
• Monitor ESOP pools: Oversized ESOP pools dilute all shareholders.
• Regular cap table reviews: Stay updated to avoid surprises in ownership shifts.

Conclusion

Equity dilution is a natural part of a growing business, especially in India's thriving startup and investment landscape. While it may seem negative on the surface, it often enables access to capital, talent, and partnerships that fuel long-term value creation. 

The key lies in understanding, planning, and strategically managing dilution to protect stakeholder interests while supporting the company’s growth.

‍

What is a Parent Company?

A parent company is a business entity that owns and controls one or more subsidiary companies. This control is usually achieved by holding a majority share (over 50%) in the subsidiary’s stock. While the parent company exercises influence over key decisions, strategy, and financial management, the subsidiaries often continue to operate independently with their own management teams.

The relationship enables the parent company to consolidate resources, reduce risks, and gain access to new markets while maintaining a diversified business structure.

Parent Company vs Holding Company

Though often used interchangeably, parent companies and holding companies serve different purposes and levels of operational involvement.

Examples of Parent Companies

Here are a few notable examples of parent companies and the subsidiaries they control:

• Alphabet Inc.
  
  • Subsidiaries: Google, YouTube, Waymo, DeepMind
    
  • Overview: Acts as the parent for Google's core businesses and experimental ventures.
    
• Unilever
  
  • Subsidiaries: Dove, Axe, Lipton, Ben & Jerry’s
    Overview: Owns and manages a diverse portfolio of consumer goods brands globally
    
• Tata Group (India)
  
  • Subsidiaries: Google, YouTube, Waymo, DeepMind
    
  • Overview: Acts as the parent for Google's core businesses and experimental ventures.
    

Register your company hassle-free with Razorpay Rize and get expert guidance every step of the way.

Types of Parent Company

Parent companies generally fall into two primary categories:

1. Holding Company

Key features of a holding company:

• Owns majority shares in other companies.
  
• Doesn’t directly engage in operations or sales.
  
• Has control over its subsidiaries' major decisions.
  
• Used for risk management, asset protection, and tax benefits.
  

Example: Tata Sons is the holding company of the Tata Group, which doesn't directly run these businesses but controls strategy and owns majority stakes.

2. Conglomerate

A conglomerate is a large business entity that owns and operates multiple companies across unrelated industries. Unlike a typical company that focuses on a single sector, a conglomerate diversifies its operations to spread risk, tap into different markets, and create multiple revenue streams.

Key Features of a Conglomerate:

• Operates in diverse, unrelated sectors
  
• Has a parent company that controls all subsidiaries
  
• Subsidiaries often run independently, with strategic guidance from the parent company
  
• Focuses on diversification, financial strength, and cross-industry synergies
  

Example: Tata Group operates in sectors from IT to steel to hospitality.

Benefits of the Parent Company

Establishing a parent company offers numerous strategic advantages:

• Risk Diversification: Losses in one subsidiary don’t affect the entire business.
  
• Financial Stability: Enables capital allocation and access to larger funding pools.
  
• Tax Efficiency: Offers scope for tax optimisation across group entities.
  
• Centralised Strategy: Unified direction and resource sharing improve efficiency.
  
• Legal Protection: Limits liability and isolates financial risks.
  

These benefits make the parent-subsidiary model ideal for scaling operations across markets and industries.

How Do Parent Companies Work?

Parent companies function through a mix of ownership control and strategic management:

• Ownership: Typically hold a majority stake in subsidiaries.
  
• Oversight: Involved in major decisions, budgeting, reporting, and governance.
  
• Independence: Subsidiaries retain autonomy for day-to-day operations.
  
• Shared Services: Often provide HR, legal, and financial support to subsidiaries.
  

This model allows a parent company to guide subsidiaries while giving them room to innovate and grow.

{{company-reg-cta}}

How to Become a Parent Company

Becoming a parent company typically involves gaining control over one or more other companies. This can be achieved through various methods, each offering different advantages and challenges. The most common routes include acquisitions, creating subsidiaries, or forming joint ventures.

1. Acquiring a Company: One of the fastest ways to become a parent company is by acquiring an existing business.
   
2. Creating a Subsidiary: Another way is by setting up a subsidiary company—a separate legal entity that is wholly owned and controlled by the parent. This allows the parent company to:
   
   • Enter new markets
     
   • Launch new products
     
   • Manage specific risks or intellectual property independently
     
3. Forming a Joint Venture: A joint venture involves two or more companies collaborating to create a new business entity, sharing ownership, control, and profits.
   

Conclusion

By holding majority stakes in subsidiaries, a parent company can effectively manage risk, diversify its investments, and expand its reach across different industries or regions. This structure allows parent companies to leverage resources, streamline operations, and enter new markets without starting from scratch.

From acquisitions and mergers to joint ventures and subsidiary creation, becoming a parent company opens doors to new growth opportunities and market dominance.

Frequently Asked Questions

What is LLP Form 3?

LLP Form 3 is a mandatory form that captures the LLP agreement, the foundation document that outlines the operational framework of a Limited Liability Partnership. This agreement defines the relationship among partners, including their roles, decision-making powers, profit and loss sharing arrangements, and more.

It serves as a legal document that governs how the LLP will be run and must be submitted to the MCA to make the LLP agreement officially valid.

Purpose of Filing LLP Form 3

Filing LLP Form 3 is essential because it:

• Legally documents the LLP agreement with the government
  Defines the rights, duties, and responsibilities of all partners
  
• Establishes clarity on how the LLP will operate
  
• Ensures regulatory compliance with the MCA
  Helps prevent internal disputes by clearly stating each partner’s role and profit-sharing ratio
  

Without a properly filed LLP Form 3, the LLP risks facing legal and operational complications.

When to File LLP Form 3?

LLP Form 3 must be filed within 30 days from the date of incorporation of the LLP.

In addition to the initial filing, any changes or amendments made to the LLP agreement, such as changes mentioned below, must also be reported by filing a fresh Form 3 within 30 days of the amendment date.

• Partner details
  
• Capital contribution
  
• Profit-sharing ratio
  
• Management structure
  

Key Components of LLP Form 3

LLP Form 3 is designed to capture critical aspects of the LLP agreement, including:

• Capital contributions of each partner
  
• Profit-sharing ratios
  
• Roles and responsibilities of partners
  
• Management structure and authority levels
  
• Decision-making processes
  
• Dispute resolution clauses
  
• Procedures for adding or removing partners
  
• Meeting protocols and voting rights
  

These elements ensure the LLP operates smoothly and fairly for all stakeholders.

Steps to File LLP Form 3

Here’s a step-by-step guide to filing LLP Form 3 online:

1. Log in to the MCA portal.
   
2. Download the latest version of LLP Form 3 under the “MCA Services > LLP E-Forms” section.
   
3. Fill in the required details of the LLP agreement:
   
   • LLP name and LLPIN
     
   • Date of agreement
     
   • Partner details and their contributions
     Rights, responsibilities, and governance structure
     
4. Attach the signed LLP agreement as a PDF
   
5. Upload any other mandatory documents (as specified)
   
6. Validate and pre-scrutinise the form using the MCA tool
   
7. Sign digitally (DSC) by a designated partner
   
8. Submit the form and make the payment online
   

{{llp-cta}}

Filing LLP Form 3 for LLP Incorporation and Changes in LLP Agreement

LLP Form 3 is divided into two key sections:

1. Initial Filing of LLP Agreement (Section 1):

Used at the time of incorporation, this section requires details like:

• Nature of business
  
• Partner contributions
  
• Profit-sharing ratios
  
• Decision-making and meeting procedures
  

2. Filing Amendments to LLP Agreement (Section 2):

Used when there’s a change in:

• Capital contribution
  
• Partners or their roles
  
• Profit-sharing arrangements
  

You must provide:

• Amendment date
  
• Number of changes
  
• SRN (Service Request Number) of related forms previously filed
  

Before proceeding to either section, you must enter basic details like LLPIN, registered address, and jurisdiction.

Additional Disclosure Requirements – Revised Form No. 3 (LLP Rules 2023)

The LLP (Amendment) Rules, 2023 introduced stricter disclosure norms in Form No. 3 to enhance transparency, especially when a corporate body is a partner.

New requirements include filling Table 19(a) with:

• Body Corporate Partner (Yes/No) – Indicates if the partner is a corporate entity.
  
• Partner/Nominee ID – DPIN, PAN, or Passport number of the individual or nominee.
  
• Additional ID Details – Supporting information related to the identification number.
  
• Corporate Type – Type of body corporate (e.g., company, LLP).
  
• Corporate ID – CIN, LLPIN, FCRN, FLLPIN, or other ID numbers.
  
• Additional Corporate Details – Extra info related to the above IDs.
  
• Corporate Name – Legal name of the body corporate partner.
  
• Designation – Whether the person is a Partner or Designated Partner.
  
• Contribution Form – Mode of contribution (Cash/Non-cash/Conversion).
  
• Contribution Value – Monetary value of the contribution.
  
• Profit Share % – Profit sharing ratio assigned to the partner.
  
• Type of Change – Whether the entry reflects an addition, deletion, change, or no change.
  

These disclosures ensure better governance and accountability within LLPs.

Fees for Filing LLP Form 3

The fee for LLP Form 3 varies based on the contribution amount:

Note: Additional charges apply for late filing, which can accrue up to ₹100 per day of delay without any cap.

Penalty for Non-Filing Form 3 LLP

Failing to file the LLP Form 3 on time results in:

• Late filing fees of ₹100 per day
  
• Potential rejection of other compliance forms
  
• Inability to legally enforce the LLP agreement
  
• Legal complications and MCA notices
  
• Difficulty in onboarding new partners or raising capital
  

Common Mistakes to Avoid

Avoid these common errors when filing LLP Form 3:

• Entering incorrect partner details
  
• Uploading unsigned or outdated LLP agreements
  
• Missing the 30-day deadline
  
• Not updating the form after changes in the LLP agreement
  
• Skipping mandatory fields in Table 19(a) (as per 2023 rules)
  

Pro Tip: Always validate and preview the form before submission, and keep a copy of the SRN for future reference.

Conclusion

LLP Form 3 is an important compliance document that legally records your LLP agreement with the Ministry of Corporate Affairs. It captures critical aspects like partner roles, profit-sharing arrangements, and decision-making protocols that define how your LLP functions.

If you’re forming an LLP or planning amendments to your existing agreement, don’t overlook LLP Form 3. Stay compliant to not only avoid hefty penalties but also build a solid foundation for the growth and scalability of your LLP.

Frequently Asked Questions

What is a Micro Finance Company?

A Micro Finance Company is a financial institution that provides small loans and financial services to low-income individuals, self-employed persons, and small enterprises who lack access to conventional banking services.

These companies play a vital role in empowering economically weaker sections, supporting entrepreneurial initiatives, and fostering local economic development by promoting financial inclusion.

Features of Micro Finance Company

Micro Finance Companies are characterised by:

• Providing small-ticket loans, typically without the need for collateral
  
• Targeting low-income, rural, and unbanked populations
  
• Offering simplified and accessible loan approval processes
  
• Promoting financial literacy and inclusive banking
  

Objectives of Micro Finance Company

The main objectives of an MFC include:

• Promoting financial inclusion for low-income individuals
  
• Empowering women and self-employed entrepreneurs
  
• Supporting small businesses and farming communities
  
• Encouraging savings and responsible financial behaviour
  
• Driving sustainable economic growth in underserved areas
  

Need for Micro Finance Company

There is a growing need for MFCs due to the lack of access to formal credit channels among the financially marginalised. Traditional banks often require credit history and collateral, which many low-income individuals cannot provide.

MFCs bridge this gap by offering unsecured loans and financial products tailored to the needs of small businesses, farmers, and micro-entrepreneurs.

Roles of a Micro Finance Company

Micro Finance Companies perform various functions that support economic empowerment:

• Disbursing microloans to low-income individuals and small enterprises
  
• Offering savings schemes and recurring deposit products
  
• Providing insurance and risk mitigation solutions
  
• Conducting financial literacy and awareness programs
  

Prerequisites for Microfinance Company Registration

A Micro Finance Company (MFC) can be registered either as an NBFC or as a Section 8 Company. The prerequisites vary depending on the type of entity you choose.

Documents Required for Micro Finance Company Registration

Key documents include:

• Identity and address proof of directors
  
• Memorandum and Articles of Association
  
• Business plan and financial projections
  
• RBI approval (for NBFCs)
  
• Certificate of Incorporation (for Section 8 companies)
  
• Net Owned Fund certificate (for NBFCs)
  
• Copy of Auditor’s report
  
• Banker’s report copy
  
• Recent credit report of the directors
  
• Net worth certificate of the directors
  
• Proof of work experience in the financial sector
  
• Tax and statutory compliance documents
  

Micro Finance Company Registration as an NBFC

Given the two different approaches to forming a microfinance company, the registration process for an NBFC-MFI follows a specific set of steps:

1. Company Incorporation:
   The first step is to register your business as either a Public Limited or a Private Limited Company. A private company requires a minimum of 2 members and a capital of ₹1 lakh, while a public company requires at least 7 members.
   
2. Capital Requirement:Next, you must raise the minimum required Net Owned Funds (NOF)- ₹5 crore for most regions.
   
3. Capital Deposit:
   Once the capital is raised, it must be deposited in a bank as a fixed deposit, and a ‘No Lien’ certificate must be obtained from the bank to confirm the funds are unencumbered.
   
4. RBI License Application:
   The company must then apply for an NBFC license by submitting an online application through the RBI’s portal, along with all necessary certified documents. Additionally, a physical copy of the application and documents must be submitted to the RBI’s regional office.
   
5. All documents should be readily available with the company at the time of filing.
   

Micro Finance Company Registration as a Section 8 Company

Alternatively, a Micro Finance company can be registered as a Section 8 Company, which is a not-for-profit entity. The steps involved in this process are:

1. Obtain DSC:
   
2. Begin by applying for the Digital Signature Certificate (DSC) for all proposed directors. The DSC is essential for digitally signing e-forms during the registration process.
   
3. Name Approval:
   
4. Next, apply for name approval using the SPICe+ form. The chosen name should reflect the company's non-profit nature- suggested words include Foundation, Sanstha, or Micro Credit.
   
5. Draft and File MOA & AOA:
   
6. Once the name is approved, prepare the Memorandum of Association (MOA) and Articles of Association (AOA). These must be filed along with the necessary supporting documents.
   
7. Submit Incorporation Documents:
   
8. Finally, all relevant incorporation documents, including Form INC-12, must be filed to obtain the license to operate as a Section 8 company.
   

Micro Finance Company Registration Fees

Registration fees vary based on the chosen structure:

• NBFCs: Government registration charges, RBI license fee, legal and consultancy fees, and compliance setup costs.
  
• Section 8 Companies: Lower fees due to no capital requirement; includes MCA license charges, incorporation costs, and legal consultations.
  

Registration Process of the Company with the RBI

Step 1: Register the Brand Name as a Trademark

Before proceeding with the RBI registration, it’s important to secure your brand identity. Registering your brand name or logo as a trademark under the Trademarks Act, 1999, ensures legal protection and exclusive rights to use the name across India.

Step 2: Incorporate the Company and Obtain a Certificate of Incorporation

Begin by registering your business as a Private Limited or Public Limited Company under the Companies Act, 2013 via the Ministry of Corporate Affairs (MCA) portal.
You will receive a Certificate of Incorporation (CoI) upon approval, which acts as the legal foundation for your microfinance company.

Step 3: Deposit Capital and Obtain No Lien Certificate

Raise the required Net Owned Funds (NOF)—₹5 crore (₹2 crore for northeastern states)—and deposit it as a Fixed Deposit in a scheduled commercial bank. Obtain a No Lien Certificate from the bank, confirming the funds are unencumbered and reserved as per RBI norms.

Step 4: Prepare and Submit the Detailed Project Report (DPR)

Create a robust Detailed Project Report covering your business plan, financial projections, risk management policies, organisational structure, and promoter background.

Step 5: Complete RBI Formalities and Gather Certified Documents

Collect all required documents, including:

• Certificate of Incorporation
  
• MOA & AOA
  
• PAN & TAN
  
• No Lien Certificate
  
• Board resolutions
  
• Audited financials (if available)
  

Step 6: Submit Online Application via RBI's Portal

Access the portal and complete the online NBFC-MFI application. Upload all necessary documents and ensure there are no errors or omissions in the form.

Step 7: Submit a Physical Application to the RBI Regional Office

After the online submission, send a hard copy of your application, including all enclosures and supporting documents, to the Regional Office of the RBI under whose jurisdiction your company falls.

Conclusion

Registering a Micro Finance Company enables you to reach underserved communities while operating within a legal and trusted framework.

Each model has its own advantages. NBFCs are ideal for those looking to operate commercially, access capital markets, and build a for-profit lending institution with high compliance standards. On the other hand, Section 8 Companies are best suited for nonprofit or social enterprise models focused on financial literacy, community development, or charitable micro-lending.

Frequently Asked Questions

What is an LC (Letter of Credit)?

A Letter of Credit (LC) is a document issued by a bank that guarantees payment to a seller on behalf of a buyer, provided that certain conditions are met. This financial instrument ensures payment security and mitigates risks associated with cross-border transactions. The issuance of an LC involves specific conditions, like the submission of required documents, which the bank reviews before releasing funds. It provides bank guarantees and incurs fees that are essential for its operation.

Examples of Letters of Credit

International Trade Example: A U.S. company wants to buy machinery from an Indian exporter. The U.S. company requests its bank to issue an LC to the Indian exporter. Once the exporter ships the machinery and presents the required documents to their bank, they receive payment from the issuing bank, ensuring trust and mitigating payment risk.

Domestic Transaction Example: A large retail chain uses an LC to purchase inventory from a local supplier. The LC guarantees that the supplier will receive payment as soon as they fulfill the delivery conditions outlined in the agreement.

Basics of a Letter of Credit Transaction

Applicant

The buyer who requests the LC from their bank. They initiate the process by applying for the LC and specifying the terms and conditions of the trade.

Beneficiary

The seller who receives payment through the LC. They must present all required documents correctly to receive payment.

Issuing Bank

The bank that issues the LC on behalf of the applicant. They verify the buyer's creditworthiness and commit to making the payment when conditions are met.

Negotiating Bank

The negotiating bank in LC that examines documents presented by the beneficiary and facilitates payment. They ensure all paperwork matches LC requirements perfectly.

The process begins when the applicant approaches their issuing bank for an LC. The issuing bank then coordinates with the negotiating bank to establish terms and verify documents before releasing any funds.

Importance of Letters of Credit

Secure Payments

They ensure that sellers receive payments without requiring advance payments, reducing risk for both parties involved in the letter of credit.

Facilitate Cross-Border Transactions

LCs simplify complex international transactions by providing a standardised payment mechanism across different countries.

Secure Business Funding

They provide businesses with necessary funding while verifying creditworthiness, helping companies maintain healthy cash flow.

Financial Assurance

LCs offer security when buyers cannot pay, acting as a guarantee backed by reliable banking institutions.

Advantages of Letters of Credit

Ease International Trade: Simplifies complex transactions across borders by providing a structured framework for payment and documentation.

Foster Global Business Connections: Builds trust between trading partners by removing payment uncertainty and providing bank-backed guarantees.

Provide Flexibility: Customisable terms to suit various transaction needs, including payment timing, shipping requirements, and document presentation.

Parties to Documentary Credit

Commercial/Trade Parties: The buyer and seller form the core of the transaction, initiating and completing the trade deal.

Banks: Issuing and advising banks serve as intermediaries ensuring secure payment and proper documentation.

Related Entities: Shipping lines and insurers support the transaction by handling logistics and risk management aspects.

Types of a Letter of Credit

Sight Credit

A Sight Credit allows instant payment upon presenting the correct documents, providing immediate access to funds for sellers. For example, if a businessman needs quick access to cash after shipping goods, they can use this type of credit.

Acceptance Credit/Time Credit

Acceptance or Time Credit involves bills that are accepted upon presentation and paid on specified due dates. This type allows sellers to receive payments after a set period.

Revocable Letter of Credit

A Revocable Letter of Credit can be canceled or modified by the issuing bank without beneficiary consent, which limits its reliability in ensuring secure transactions.

Irrevocable Letter of Credit

An Irrevocable Letter of Credit guarantees payment once certified by the exporter’s bank. This type provides security for international transactions and is often preferred by exporters due to its reliability.

Confirmed Letter of Credit

A Confirmed Letter of Credit involves both issuing and confirming banks. The confirming bank guarantees payment to the beneficiary, holding equal liability as the issuing bank, ensuring that payments will be honored upon proper presentation.

Back-to-Back Letter of Credit

This type involves issuing a second LC based on the security provided by the first LC. It is commonly used to secure payments for suppliers in international trade transactions.

Transferable Letter of Credit

A Transferable Letter of Credit allows the primary beneficiary to transfer credit partially or fully to another beneficiary, typically a supplier. However, once transferred, the second beneficiary cannot transfer it further.

Restricted Letter of Credit

A Restricted Letter of Credit specifies a particular bank responsible for payment, limiting its scope compared to unrestricted LCs. This type is often used when specific banks are preferred due to their reliability.

Revolving Letter of Credit

A Revolving Letter of Credit allows reuse after payments or drawings are made. This flexibility is beneficial for businesses requiring multiple shipments or ongoing transactions under one credit arrangement.

Precautions to be Taken

Verify Bank Reliability: The issuing bank must be reliable and well-known to both parties of the letter of credit. This helps minimise risks and ensures the LC will be honored when presented.

Local Bank Verification: It's essential to advise through an Indian bank and confirm the authenticity of the LC. The local bank can verify the legitimacy of the foreign bank and ensure all documents meet local regulations.

Clarify Financial Terms: Make sure to clearly establish who covers all bank charges and confirm freight payment terms as specified in contract agreements. This prevents disputes and unexpected costs during the transaction process.

Import Export Code

The Import Export Code (IEC) is a mandatory document required for all businesses involved in international trade. This code streamlines customs clearance, enables duty benefits, and ensures regulatory compliance. Through platforms like Razorpay Rize, businesses can obtain their IEC within 6-7 days which makes the process efficient and straightforward.

Frequently Asked Questions

What is the purpose of Form 8?

Form 8 LLP is an annual return that discloses an LLP's financial position and solvency. It is mandatory under the Limited Liability Partnership Act 2008, to promote transparency and ensure that LLPs meet their financial obligations. By filing Form 8 LLP, an LLP confirms its ability to pay debts as they become due in the normal course of business.

The form provides the MCA with an overview of the LLP's assets, liabilities, and cash flows, enabling them to monitor the financial health of the LLP. Banks, creditors, and other stakeholders may also refer to an LLP's Form 8 filings to assess its creditworthiness and make informed decisions.

LLP Form 8 - Statement of Account & Solvency

LLP Form 8, or the Statement of Account & Solvency, is an annual filing that every LLP must submit to the MCA, regardless of its size, turnover, or profitability. The form consists of two main parts:

• Part A: Statement of Solvency
• Part B: Statement of Account (Financial Statements)

The Statement of Solvency is a declaration by the LLP's designated partners confirming that the LLP is able to pay its debts in full as they become due. This section must clearly disclose any insolvency or inability to pay debts.

The Statement of Account includes the LLP's financial statements, such as the balance sheet, profit and loss account, and cash flow statement. These statements provide a true and fair view of the LLP's financial position and performance.

Timely filing of Form 8 LLP is crucial to avoid penalties and maintain compliance with the LLP Act. The due date for filing falls on October 30th each year for the financial year ending March 31st.

Get Your LLP Registered Seamlessly with Razorpay Rize – Start Today!

Laws Governing Form 8

The filing of Form 8 LLP is governed by the following laws:

• Section 34(2) and 34(3) of The Limited Liability Partnership Act, 2008
• Rule 24 of The Limited Liability Partnership Rules, 2009

These laws require all LLPs to file Form 8 annually and prescribe the format, disclosures, and timelines for filing the form. Non-compliance with these provisions can result in penalties and legal action against the LLP and its partners.

Components of Form 8

LLP Form 8 consists of two main sections:

1. Part A - Statement of Solvency
   
   • Declaration by the designated partners about the LLP's ability to meet its debts and liabilities
   • Disclosure of any insolvency or inability to pay debts
2. Part B - Statement of Accounts
   
   • Balance sheet as of the end of the financial year
   • Profit and loss account for the financial year
   • Cash flow statement for the financial year
   • Notes to accounts and significant accounting policies
   • Details of remuneration to designated partners
   • Auditor's report, if applicable

LLPs must ensure that the financial statements are prepared in accordance with the applicable accounting standards and present a true and fair view of the state of affairs. Depending on the LLP's turnover and contribution, the financial statements may need to be audited before filing.

The Due Date for Filing LLP Form 8

LLP Form 8 must be filed annually, within 30 days from the end of six months of the financial year to which the Statement of Account and Solvency relates. For LLPs following the April-March financial year, the due date for filing Form 8 LLP is October 30th of each year.

It is essential to note that this filing requirement applies to all LLPs, irrespective of their size, turnover, or commencement of business activities. Even inactive LLPs must file Form 8 to avoid penalties.

Failure to file the form by the due date attracts additional fees and penalties, which increase with the delay. LLPs must prioritise timely filing to maintain legal compliance and avoid adverse consequences.

Related Read: What is LLP Form 11?

Required Details for Filing Form 8

To file LLP Form 8, the following details are required:

• Limited Liability Partnership Identification Number (LLPIN)
• Name and registered address of the LLP
• Details of designated partners
• Jurisdiction of Police Station for the registered office
• The financial year to which the Statement of Account and Solvency relates
• Statement of Assets and Liabilities as at the end of the financial year
• Income and Expenditure Statement for the financial year
• Details of charges created, modified or satisfied during the year
• Details of penalties and compounding fees paid during the year

Attachments Required with LLP Form 8

1. Mandatory attachment:
   
   1. Details of disclosures under the Micro, Small and Medium Enterprises Development Act, 2006
2. Conditional attachment:
   
   1. Statement of contingent liabilities, if applicable
3. Optional attachments:
   
   1. Any other relevant information or documents

Small LLP

The concept of "Small LLP" was introduced by the LLP (Amendment) Act, 2021 to reduce the compliance burden and costs for smaller LLPs. An LLP is classified as a Small LLP if it meets the following criteria:

• The contribution does not exceed ₹25 lakhs (or higher amount as notified by the Central Government, up to a maximum of ₹5 crores)
• The turnover in the immediately preceding financial year does not exceed ₹40 lakhs (or higher amount as notified by the Central Government, up to a maximum of ₹50 crores)

Small LLPs enjoy several benefits, such as:

• Lower filing fees for Form 8 LLP and other forms
• Relaxed penalties for non-compliance
• Self-certification of documents by designated partners without the need for professional certification

However, Small LLPs must still comply with the filing deadlines and other requirements under the LLP Act. Their classification as Small LLPs is based on self-declaration, and any false or incorrect declaration can attract penalties.

MCA Fees for filing Form 8

Inadequate or incorrect payment of fees can result in the form being marked as defective, requiring re-submission with additional fees.

Related Read: LLP Registration Fee in India

Additional Fee (Penalty) for Filing Form 8

Late filing of Form 8 LLP attracts additional fees, which vary based on the period of delay and the type of LLP (Small LLP or Other LLP). The additional fees for late filing are as follows:

LLPs should strive to file the form within the due date to avoid these additional fees and maintain compliance with the LLP Act.

Certification Requirements for Form 8

Form 8 LLP must be certified by the following individuals before filing:

• Minimum two designated partners of the LLP
• A practising professional (Chartered Accountant, Company Secretary, or Cost Accountant)

The designated partners must sign the form, declaring that the information provided is true and correct to the best of their knowledge. The practising professional must certify that the financial statements and other particulars in the form agree with the LLP's books of account and records.

Small LLPs are exempted from the professional certification requirement, and the designated partners can self-certify the form. However, it is advisable to seek professional assistance to ensure accurate and compliant filing.

Procedure to file Form 8

The procedure to file LLP Form 8 involves the following steps:

1. Access the MCA portal and log in using the LLP's credentials
2. Navigate to the "LLP Forms Download" section and select "Form 8"
3. Fill in the required details and attach the necessary documents
4. Save the form as a draft if required, or submit the form
5. Generate and note down the Service Request Number (SRN) for future reference
6. Affix Digital Signature Certificates (DSCs) of the designated partners and practising professional
7. Upload the signed form on the MCA portal
8. Make the payment of filing fees within 15 days of SRN generation
9. Upon successful payment, an acknowledgement receipt will be generated

LLPs should ensure that all the steps are completed within the prescribed timelines to avoid any delays or rejection of the filing. 

Annual filings for LLP

Apart from Form 8 LLP, LLPs are required to file other annual forms to comply with the MCA regulations. These include:

• LLP Form 11 (Annual Return)
• Income Tax Return (ITR) 5

Timely filing of these forms is crucial to avoid penalties, which can be significant—up to ₹5 lakh for non-compliance. Although LLPs have fewer compliance requirements compared to private limited companies, failure to meet these obligations can lead to serious consequences. Maintaining proper books of account is essential for facilitating accurate and timely filings.

{{llp-cta}}

Example of LLP Form 8 Filing

Let's consider a simple case study to understand the filing of LLP Form 8:

ABC LLP, with total assets of ₹5 lakhs and liabilities of ₹2 lakhs, needs to file its Statement of Account and Solvency for the financial year 2024-25.

The LLP follows these steps to fill the form:

1. The designated partners prepare the financial statements, including the balance sheet and profit & loss account.
2. They fill out LLP Form 8, providing the required details and attaching the necessary documents.
3. The form is then certified by the designated partners and a Chartered Accountant (CA).
4. The LLP files the form online through the MCA portal, affixing the Digital Signature Certificate (DSC) and making the requisite payment.
5. The form is submitted within the due date of October 30th, 2025, to avoid any late fees or penalties.

MCA LLP Compliance Chart

The following chart summarises the key compliance requirements for LLPs in India:

LLPs must prioritise these filings and ensure timely submission to maintain compliance with the MCA and Income Tax Department regulations. 

Frequently Asked Questions:

Closure of LLP - Overview

The Limited Liability Partnership (LLP) closure process is a significant decision that can arise from various circumstances. Whether driven by voluntary factors, such as a mutual decision by the partners to discontinue operations, or involuntary factors, like non-compliance with statutory requirements, understanding the reasons and methods of closure is crucial.

The decision to close an LLP often stems from the following reasons:

1. Voluntary Closure:
   Partners may mutually agree to cease operations due to business inactivity, an unprofitable venture, or a strategic shift in focus. This proactive decision is usually taken when all stakeholders conclude that continuing operations no longer align with their goals.
2. Involuntary Closure:
   Sometimes, an LLP faces closure due to external circumstances such as non-compliance with legal or regulatory obligations, accumulation of penalties, or other statutory violations. In such cases, authorities may initiate the process of striking off the LLP from the official records.

Method or Procedure of Closing an LLP

Closing a Limited Liability Partnership (LLP) in India can be carried out through two primary methods: Voluntary Winding Up and Striking Off. Each method has its unique set of requirements, advantages, and limitations. Choosing the right approach depends on the LLP’s operational and financial status. Let’s look into the details of these two LLP closing procedures:

1. Voluntary Winding Up

Voluntary winding up is a process initiated by the partners when they collectively decide to dissolve the LLP. This method is typically chosen when the partners agree to cease operations due to inactivity, unprofitability, or a strategic decision to exit.

Advantages of Voluntary Winding Up:

• Controlled and Planned Process
• Avoids Penalties for Non-Compliance

Disadvantages of Voluntary Winding Up:

• Time-Consuming
• Settlement of Liabilities Required

2. Striking Off

Striking off is a simpler and faster method for closing an LLP. It is suitable for LLPs that have been inactive for a significant period and have no outstanding liabilities. This process involves applying to the RoC to remove the LLP’s name from the register.

Advantages of Striking Off:

• Simplified and Less Expensive
• Suitable for Dormant LLPs

Disadvantages of Striking Off:

• Not Applicable for LLPs with Liabilities
• Limited Scope for Active LLPs

Step-by-Step Procedure to Close an LLP

A brief overview of the process for closure of LLP in India:

1. Passing a Resolution for Winding Up

The first step is for the partners to pass a resolution for voluntary winding up. A majority of partners must agree, and the resolution must be filed with the ROC within 30 days.

2. Appointing a Liquidator

The partners must appoint a liquidator to oversee the winding-up process. The liquidator’s role includes realising the LLP’s assets and settling its liabilities.

3. Realising Assets and Paying Off Liabilities

The liquidator identifies and sells the LLP’s assets to clear all outstanding liabilities. Surplus funds, if any, are distributed among the partners.

4. Filing the Necessary Forms with the ROC

The LLP must file forms such as Form 24 and other requisite filings with the ROC to notify the authorities about the closure.

5. Obtaining the Final Order of Dissolution

After reviewing all filings and confirming the settlement of liabilities, the ROC issues a final order of dissolution, formally closing the LLP.

Filing LLP Form 24: Step-by-Step Process

Closing a Limited Liability Partnership (LLP) in India requires filing LLP Form 24 with the Ministry of Corporate Affairs (MCA). Below is a simplified step-by-step process to help you navigate this procedure:

1. Cease Business Operations

Before applying for closure, ensure that the LLP has either never commenced business or has stopped all commercial activities. If your LLP is still active, suspend all operations before proceeding.

2. Settle Liabilities and Close Bank Accounts

LLP Form 24 can only be filed if the LLP has no outstanding creditors and all bank accounts are closed. Obtain a closure letter from the bank as proof.

3. Draft Partner Affidavits

All designated partners must prepare an affidavit declaring:

• The LLP has ceased operations from a specific date or never started.
• The LLP has no liabilities, and partners agree to indemnify any future claims.

4. Prepare Supporting Documents

Attach the following documents to LLP Form 24:

• Copy of the latest Income Tax Return (if filed). If no returns were filed, this is not required for non-operational LLPs.
• A statement of accounts showing nil assets and liabilities, certified by a Chartered Accountant, dated no more than 30 days before filing.

5. Resolve Pending Filings

Ensure that:

• The LLP Agreement is filed, if not already done.
• Any overdue Form 8 and Form 11 are submitted up to the date of cessation of business.

6. File LLP Form 24 with MCA

Submit the completed LLP Form 24 with all attachments to the MCA. Once reviewed, a notice of striking off will be published on the MCA website if no objections are raised.

Documents Required to Close the LLP

Here is a list of LLP closure documents required during the process:

• Board Resolution for Winding Up: Document signed by all partners approving the winding-up process.
• Liquidator’s Consent: Written consent from the appointed liquidator.
• No-Objection Certificate from Creditors: If applicable, creditors must provide a no-objection certificate.
• Final Accounts and Balance Sheet: Statement of accounts showing all liabilities cleared.
• Tax Clearance Certificates: Certificate from the tax authorities confirming no pending dues.

 Conditions for LLP Closure

Certain conditions must be met before initiating the LLP closure process:

• Settlement of Debts and Liabilities: All outstanding debts and liabilities must be cleared.
• Statutory Filings: All statutory filings and compliance requirements must be up-to-date.
• Approvals: Necessary approvals from all partners and creditors (if applicable) must be obtained.

Advantages and Disadvantages of LLP

Like any business entity, an LLP has its own advantages and disadvantages that should be carefully considered before choosing this structure.

Advantages of an LLP

1. Limited Liability: The liability of partners is limited to their agreed contribution to the business, protecting personal assets in case of business debts or losses.
2. Separate Legal Entity: An LLP is a separate legal entity from its partners, meaning it can own assets, enter into contracts, and sue or be sued independently.
3. Flexibility in Management: There is no strict separation between ownership and management, allowing partners to manage the business as per their agreement.
4. No Minimum Capital Requirement: Unlike private limited companies, LLPs do not have a minimum capital requirement, making them more accessible to small businesses and startups.
5. Ease of Compliance: LLPs have fewer compliance requirements compared to companies, such as no mandatory board meetings or annual general meetings.
6. Unlimited Number of Partners: An LLP can have any number of partners, offering greater flexibility in expanding ownership.
7. Low Registration Cost: Setting up an LLP is more affordable than incorporating a private limited company.

Disadvantages of an LLP

1. Limited Recognition: LLPs are not as widely recognised as private limited companies, which may affect investor confidence or business collaborations.
2. Restrictions on Fundraising: LLPs cannot raise funds through equity, making them less suitable for businesses looking to attract venture capital or private equity investment.
3. Limited Scope for Public Trust: LLPs are not listed on stock exchanges, so they may lack the transparency that comes with publicly traded companies, leading to lower public trust.
4. Difficulty in Expansion: LLPs are not ideal for businesses aiming for rapid scalability, as the inability to issue shares limits their access to growth capital.

An LLP is an excellent choice for small businesses, professionals, and startups looking for a flexible, cost-effective business structure with limited liability. However, it may not be suitable for companies that require significant funding or aspire to scale rapidly. 

Frequently Asked Questions

What Are the Types of Business Entities?

India’s vibrant economy is home to diverse industries and entrepreneurial ambitions, necessitating a range of business entity options. From solo ventures to large-scale collaborations, the choice of business structure directly impacts a company's growth, legal compliance, tax obligations and operational efficiency.

There are different types of companies in India, ranging from individual ownership models to multi-member organisations, catering to various needs and scales. These include:

• Sole Proprietorship
  
• Limited Liability Partnerships (LLP)
  
• Private Limited Companies
  
• One Person Companies (OPC)
  
• Section 8 Companies
• Partnerships
• Public Limited Companies
• Joint-Venture Companies
• Non-Government Organisations (NGOs)

Types of Business Structures in India

India offers a variety of business structures to suit different entrepreneurial needs, scales and industries. Each structure has unique features, benefits and drawbacks, making it crucial to choose the right one based on your business goals. Let’s dive deeper into different types of businesses in India:

1. Sole ProprietorshipA sole proprietorship is the simplest and most commonly adopted business structure in India, especially for small businesses or individual entrepreneurs. It is an unincorporated business owned and managed by a single person.
   Features:
   
   • No separate legal entity; the business is considered the same as the owner.
   • Unlimited liability: The owner's personal assets are at risk in case of debts.
   • Minimal compliance: Easy to set up and operate with fewer regulations.
2. PartnershipA partnership is a business structure where two or more individuals share ownership, profits and responsibilities. It is governed by the Indian Partnership Act of 1932 and is ideal for businesses requiring diverse skill sets.
   Features:
   
   • Joint ownership and decision-making.
   • Unlimited liability for all partners unless specified otherwise in the partnership agreement.
   • No perpetual succession; the partnership dissolves upon a partner's death or withdrawal.
3. Limited Liability Partnerships (LLP)An LLP blends the advantages of a partnership with the benefits of limited liability. Introduced under the LLP Act of 2008, it is ideal for professionals or small businesses looking for a flexible yet secure structure.
   Features:
   
   • Combines the flexibility of partnerships with limited liability protection.
   • A separate legal entity from its partners.
   • Requires at least two designated partners.
4. Private Limited Companies (Pvt Ltd)A Private Limited Company is a favoured structure among startups and small-to-medium enterprises with several advantages. It is governed by the Companies Act of 2013 and allows for limited liability while offering scalability.
   Features:
   
   • Separate legal identity from its owners.
   • Limited liability for shareholders.
   • Eligibility to issue shares for raising funds.
5. Public Limited CompaniesA Public Limited Company is suitable for businesses aiming to scale operations and raise public funds through shares. A company whose shares are publicly traded, with ownership open to the general public.
   Features:
   
   • Requires a minimum of seven shareholders and three directors.
   • No upper limit on the number of shareholders.
   • Vulnerable to market fluctuations.
6. One Person Companies (OPC)Introduced under the Companies Act of 2013, an OPC caters to solo entrepreneurs seeking limited liability benefits. Simply put, a single individual owns the company while enjoying limited liability protection.
   Features:
   
   • Mandatory to appoint a nominee.
   • Limited liability for the owner.
   • Not eligible for equity funding.
7. Section 8 Companies (NGOs)Section 8 Companies are nonprofit organisations formed under the Companies Act of 2013 to promote social welfare activities. These companies focus on charitable objectives like education, healthcare or environmental protection.
   Features:
   
   • Profits cannot be distributed as dividends.
   • Tax exemptions are available under specific conditions.
8. Joint-Venture CompaniesA Joint- Venture (JV) combines two or more entities to collaborate on a specific project or goal. Partners share resources, expertise and profits while retaining their individual entities.
   Features:
   
   • Operates under a joint agreement for a specific purpose.
   • Temporary or long-term collaboration.
   • Shared financial risks.
9. Non-Government Organisations (NGOs)NGOs are entities dedicated to social welfare causes, operating independently of the government. NGOs can be structured as trusts, societies or Section 8 Companies, focusing on various charitable activities.
   Features:
   
   • Operates without a profit motive.
   • May qualify for tax exemptions.
   • Drives social change and community development.

Types of Companies Based on Size

In India, companies can be categorized based on their size, typically determined by factors such as turnover, capital investment, and employee count. Here are the main types of companies in India based on size:

Here are the main types of companies based on members:

1. Micro Enterprises

Micro-enterprises are the smallest category of companies, characterized by low investment in plant and machinery or equipment. In India, micro-enterprises are defined as those with an investment of up to Rs. 1 crore in manufacturing and an annual turnover of Rs. 5 crore.

2. Small Enterprises

Small enterprises are slightly larger than micro-enterprises but still fall within the small-scale sector. In India, small enterprises are defined as those with an investment of not more than Rs. 10 crore and an annual turnover of not more than Rs. 50 crore.

3. Medium Enterprises

Medium enterprises are larger than small enterprises but smaller than large corporations. In India, medium enterprises are defined as those with an investment of more than Rs. 50 crore in manufacturing and an annual turnover of not more than Rs. 250 crore.

4. Large Enterprises

Large enterprises are the largest category of companies, characterized by substantial investment, high turnover, and a large workforce. In India, large enterprises have investments exceeding Rs. 50 crore in manufacturing or Rs. 250 crore in services. They often have hundreds or even thousands of employees and operate nationally or multinational.

These categories are defined by the Ministry of Micro, Small, and Medium Enterprises (MSME) in India to provide various benefits and incentives to small and medium-sized enterprises (SMEs), such as priority lending, subsidies, tax exemptions, and easier access to government schemes and programs.

Types of Companies Based on Liabilities

Companies can be categorized based on the extent of liability their members or owners have. Some major types of companies based on liabilities are-

1. Company Limited by Shares

A Company Limited by Shares is a type of company where the liability of its members is limited to the amount unpaid on their shares. This means that shareholders are not personally liable for the company's debts beyond the amount they have agreed to contribute towards the shares they hold.

Companies Limited by Shares can be further classified into private limited companies and public limited companies based on the number of shareholders and other criteria.

2. Company Limited by Guarantee

In a Company Limited by Guarantee, the liability of its members is limited to the amount they agree to contribute to the company's assets in the event of its winding up. This type of company is commonly used for non-profit organizations, clubs, societies, and associations.

3. Unlimited Liability Company

In an Unlimited Liability Company, the members or owners have unlimited personal liability for the company's debts and obligations. This means that their personal assets are at risk to satisfy the company's liabilities, and creditors can pursue the members' personal assets to settle debts owed by the company.

Types of Companies Based on Listing Status

Companies can also be classified based on their listing status, which refers to whether their shares are listed on a stock exchange for public trading.

1. Listed Companies

Listed companies are those whose shares are listed and traded on a recognized stock exchange, such as the Bombay Stock Exchange (BSE) or the National Stock Exchange (NSE) in India.

These companies are subject to stringent regulatory requirements and disclosure norms mandated by the Securities and Exchange Board of India (SEBI). Listing provides liquidity to shareholders and enables the company to raise capital by issuing additional shares to the public.

2. Unlisted Companies

Unlisted companies are those whose shares are not traded on any stock exchange. These companies may be privately held, meaning that their shares are owned by a small group of shareholders or closely held by promoters and investors.

Unlisted companies are not subject to the same level of regulatory scrutiny as listed companies but may still be required to comply with certain statutory requirements under the Companies Act.

Types of Companies Based on Holding

Companies can be categorized based on their holding structure, which refers to the relationship between parent companies and their subsidiaries.

1. Parent Company

A parent company is a corporation that owns a controlling interest in one or more subsidiary companies. It typically holds more than 50% of the voting rights in the subsidiary companies and has the power to make decisions affecting their operations and strategic direction.

2. Subsidiary Company

A subsidiary company is a company that is controlled by another company, known as the parent company. Subsidiary companies can be wholly or partially owned by the parent company, depending on the percentage of shares held.

Subsidiary companies operate independently but are subject to the control and influence of the parent company.

3. Holdings Company

A holdings company is a company whose primary purpose is to hold investments in other companies rather than engage in operational activities. Holdings companies typically own shares in subsidiary companies and may provide their subsidiaries with strategic direction and financial support.

Unlike a parent company, a holding company does not engage in business operations of its own.

4. Affiliate Company

An affiliate company is a company that is related to another company through common ownership or control. Affiliate companies may be part of the same corporate group or have a strategic partnership with each other.

5. Associate Company

An associate company is one in which another company holds a significant but not controlling interest, usually between 20% to 50% of the voting rights. While the investing company has influence over the associate company's operations and management, it does not exercise full control.

Documents Required to Open Different Types of Business in India

Here’s a list of documents required to open a company in India:

• Identity Proof: PAN card, Aadhaar card
• Address Proof: Utility bill, rent agreement, or property papers
• Business Registration Forms: Forms based on the business type (SPICe+, FiLLiP, etc.)
• Digital Signature Certificate (DSC): For online submissions
• Proof of registered office address: NOC or Rental Agreement

Additional documents may be required based on the business type, such as MOA and AOA for companies, LLP Agreements for LLPs or trust deeds for NGOs.

Conclusion

In India, the variety of business entities ensures there’s a fit for every kind of entrepreneur—whether you're a solo dreamer with a big vision, a small team building something impactful, or an organisation driven by social change.

Each type of entity offers unique features, advantages and challenges. From the simplicity of a sole proprietorship to the robust framework of private limited companies or the flexibility of LLPs, picking the right one can make your journey smoother, protect your personal assets and set you up for growth.

Think about your business goals:

• Do you want to stay small and agile or scale into a large organisation?
• Do you need investors or want to keep it self-funded?
• Are compliance and taxes manageable?

Your answers to these questions will guide you toward the perfect fit. If you’re unsure where to start, don’t worry—many successful entrepreneurs were in the same place when they started. The key is to take it one step at a time.

Frequently Asked Questions

Benefits of USA Company Registration

It is highly advisable to go for U.S. incorporation when aiming to raise capital from U.S. investors or penetrate the U.S. market with product sales. Beyond the inherent credibility associated with a U.S. business entity, it instills investor confidence and aligns with U.S. regulatory expectations.

• It boasts a thriving and a diverse business ecosystem, providing access to a vast market, diverse consumer base, and a network of established businesses and startups.
• Companies incorporated in the U.S. often find it easier to attract investment, whether through venture capital, private equity, or public markets.
• It is home to renowned innovation hubs such as Silicon Valley, which fosters creativity, collaboration, and technological advancement. This can be especially beneficial for tech startups and businesses in emerging industries.
• It offers a relatively straightforward process for business incorporation. Many states, like Delaware, have business-friendly regulations and efficient online platforms that facilitate the setup and management of companies.
• While the U.S. tax system is complex, businesses may find advantages in various tax incentives and deductions, especially if structured as certain types of corporations.
• It can serve as a strategic base for international expansion, providing a gateway to both North American and global markets.

Types for Company Registration in USA from India

The United States offers several types of legal structures for businesses, each with its own characteristics and implications. Here are some of the most common types:

•  Single-Person Businesses

•  S Corporations

•  C- Corporations (C-Corp)

•  Limited Liability Companies (LLCs)

•  Non-profit Organizations

Regarding U.S. business structures, two predominant forms of incorporation stand out: Limited Liability Companies (LLCs) and C-Corporations (C-Corps). These structures offer distinct features tailored to diverse business needs and goals.

• If you want lower compliance and small franchise fees: An LLC may be a suitable choice, especially for small businesses or startups with simpler structures and a desire for reduced administrative burdens.
• If you want to raise funds: If the goal is to attract external investment, issue stock, or go public in the future, a C Corporation is often more attractive to investors and provides the necessary flexibility for these activities.

Minimum Requirements to register a company in the U.S.

To register a company in the U.S., several essential criteria must be met.

• Minimum Number of Individuals:
  At least one person is required to register a company in the U.S. This person can act as the sole owner or be part of a group of owners (members or shareholders), depending on the chosen business structure (e.g., LLC, corporation).
• Registered Agent in Delaware:
  If choosing to register the company in Delaware, having a registered agent in the state is a legal requirement. The registered agent is a person or entity designated to receive legal documents, official correspondence, and other important information on behalf of the company.
• U.S. Address:
  A U.S. address is required for official correspondence and legal purposes. This address can be either a physical location (such as a brick-and-mortar office) or a virtual address, depending on the nature of the business and the chosen state of registration.

Documents required for U.S. Incorporation

A succinct breakdown of the documents needed for the initial stages of business registration.

• Name Approval:
  The process for name approval is straightforward. In Delaware, you can perform a real-time search for the desired business name and immediately reserve it if available. This reservation ensures that your chosen business name is secured for your use.
• Director Details:
  Provide details about the directors or members of the company. This typically includes full names, addresses, contact information, and roles or titles within the company.
• Number of Shares and Value Per Share:
  Specify the number of authorized shares the company is allowed to issue. Also, determine the par value or the assigned value to each share.

Process for Company Registration in the USA

Must-Have Documents After Incorporation

Here’s a list of documents that a business typically receives after the registration process:

1. Certificate of Incorporation

• This document, issued by the state authorities, officially recognizes the establishment of the corporation. It includes important details such as the company's name, location, and date of incorporation.

2. EIN (Employer Identification Number)

• The EIN is a unique identifier assigned by the IRS for tax purposes. It typically takes 3 to 4 weeks through standard processing, but an expedited option is available, reducing the timeline to 3 days if you already possess a Social Security Number (SSN).
  This unique identifier, similar to India's PAN (Permanent Account Number), is necessary for various business activities, including opening a bank account, hiring employees, and filing tax returns.

3. Bylaws of the Company (Similar to Articles of Association)

• Bylaws are internal rules that govern the operation and management of the company. They outline procedures for meetings, decision-making, and other essential aspects of corporate governance.
  In some ways, they are similar to the Articles of Association mandated in India.

4. Banking Resolution

• A banking resolution is a formal document that authorizes specific individuals within the company to open and manage bank accounts on behalf of the corporation. It provides clarity and legal authority for banking-related activities.

5. Common Stock Certificate

• Common stock certificates represent ownership in the company. When shares are issued, these certificates are given to shareholders as evidence of their ownership stake in the corporation. They typically include details such as the shareholder's name, the number of shares, and the date of issuance.

Compliances for U.S.- Incorporated Companies

Let's dive into the detailed aspects of compliance for businesses in the US, particularly those with C-Corporation structures and operations in Delaware.

1. Federal Income Tax

• The Federal Income Tax rate of 21% applies to C-corporations in the United States. They are required to file a tax return annually using the IRS Form 1120. This form outlines the corporation's income, deductions, credits, and taxes owed, etc.

2. Withholding Tax and Related Party Transactions Disclosure

• Similar to Tax Deducted at Source (TDS), withholding Tax in the U.S. involves deducting a portion of payments made to non-residents for services, dividends, or interest. Additionally, disclosure of related party transactions is a key compliance requirement, ensuring transparency in financial dealings with affiliated entities.

3. Delaware State Franchise Tax

• Delaware imposes an annual franchise tax on corporations, and the amount varies depending on the type and size of the corporation. The calculation is often based on factors such as authorized shares or assumed par value capital.

4. Delaware State Corporate Income Tax

• In addition to federal taxes, C-Corporations operating within the state of Delaware are subject to state corporate income tax at a rate of 8.7% on income generated within the state.
  To meet state tax obligations, C-Corporations file the Delaware Form 1100, providing detailed information on income, deductions, and other relevant financial data.

5. Other Regulatory Compliances in Delaware

• Beyond tax-related obligations, businesses in Delaware must adhere to additional regulatory requirements. This includes filing an annual report with the Delaware Secretary of State.

In a nutshell, be it India or the U.S., there will be a lot of compliances to keep a record of. By diligently meeting these obligations, you can fulfill legal mandates and contribute to a robust and trustworthy business environment.

Incorporation in U.S. vs India

When expanding operations from India to the United States, a common strategy involves incorporating a new U.S. company, followed by transferring shares from the Indian parent company (which must be a Private Limited Company) to the newly formed U.S. entity. The Indian company would become a subsidiary of the U.S. company, and there is no such limit to the number of subsidiaries an entity can have.

Keep in mind the compliances and FEMA guidelines to be adhered to during this process, which establishes the U.S. company as a subsidiary of its Indian counterpart, creating a legal and financial separation. The benefits of this approach include improved access to U.S. markets, legal autonomy for each entity, and strategic financial advantages.

{{pvt-cta}}

*Prices and documents can differ based on the company type.

Difference between Private Limited, LLPs & OPCs

Now that we've introduced the differences between these three types, let's explore their features and registration processes more thoroughly. This will help you determine which one is the most suitable for your business needs.

Private Limited Company: Features

In India, the Private Limited Company stands as the predominant choice for company registration, governed by the Companies Act of 2013 under the jurisdiction of the Ministry of Corporate Affairs (MCA). This structure is favoured by startups and businesses aspiring for growth and stability, owing to its adaptable ownership model and efficient management practices.

Outlined below are some key characteristics of a Private Limited Company:

1. Limited Liability

• Shareholders enjoy limited liability, safeguarding personal assets from business debts.

2. Separate Legal Entity

• Regarded as a distinct legal entity from its shareholders, allowing it to engage in contracts, own assets, and litigate under its name.

3. Ownership

• Owned by shareholders who possess shares in the company, with ownership transfer facilitated through share transactions.

4. Management

• Managed by appointed Directors, while day-to-day operations are overseen by management, with significant decisions often requiring shareholder approval.

5. Shareholders

• Requires a minimum of two shareholders and can accommodate a maximum of 200.

6. Regulation and Compliance

• Governed by the Companies Act and regulated by the Ministry of Corporate Affairs, mandating compliance with annual financial filings, general meetings, and statutory record maintenance.

7. Investment and Funding

• Attracts investment and funding relatively easily due to its defined ownership structure and limited liability feature.

Private Limited Company: Registration in India

The Ministry of Corporate Affairs (MCA) has introduced a streamlined and online process for company incorporation known as Simplified Proforma for Incorporating Company Electronically Plus (SPICe+), comprising two parts: Part A and Part B.

The steps are as follows:

1. Step 1: Apply for DSC

• Obtain a Digital Signature Certificate (DSC) from Certifying Agencies (CAs) with either one or two-year validity.

2. Step 2: Apply for Name Approval

• Apply for name using SPICe+ Part A which facilitates 'Name Reservation' with the provision for two proposed names and one re-submission (RSUB).

Note: While simultaneous application for name approval (Part A) and Incorporation (Part B) through SPICe+ is feasible, only one name can be reserved.

3. Step 3: Apply for Company Registration & Other Applications

• Following name approval, apply for Company Registration using SPICe+ Part B, which also includes the application for allotment of Director Identification Number (DIN), Permanent Account Number (PAN), Tax Deduction and Collection Account Number (TAN), etc.

4. Step 4: Apply for a Bank Account

• Open a current account for your company to facilitate seamless financial transactions and business operations.

5. Step 5: File the Commencement of Business Certificate

• Within 180 days of incorporation, file the Commencement of Business Certificate through Form INC-20A, which is a declaration submitted by the Director of the Company to the Registrar of Companies.

Upon approval of the SPICe+ Form, the Registrar of Companies (ROC) issues the Certificate of Incorporation, confirming the successful registration of your company.

The Certificate of Incorporation includes vital information such as the Company's name, registration number (CIN), date of incorporation, registered office address, and so on.

Example of CIN: U72200KA2013PTC097389

Read more about what each letter in a CIN signifies here.

{{pvt-cta}}

Limited Liability Partnerships: Features

A Limited Liability Partnership (LLP) is a business structure that combines features from both traditional partnerships and limited companies. And, LLPs are often favoured by professional services firms, small businesses, and ventures seeking the blend of partnership flexibility and limited liability protection.

Key characteristics of an LLP include:

1. Limited Liability

• Partners in an LLP benefit from limited liability akin to private limited companies.

2. Separate Legal Entity

• An LLP exists as a distinct legal entity from its partners, capable of owning assets, entering contracts, and engaging in legal proceedings independently.

3. Ownership

• Partners own the LLP, with the ownership structure outlined in the LLP agreement. Ownership transfer typically requires consent from other partners.

4. Management

• Managed by partners or a designated management team as specified in the LLP agreement. Decision-making is often collaborative, with each partner having an equal say.

5. Number of Partners

• Requires a minimum of two partners, with no maximum limit.

6. Regulation and Compliance

• Governed by the Limited Liability Partnership Act in India, featuring less stringent regulatory requirements compared to private limited companies. Compliance entails filing annual returns and maintaining statutory records.

7. Flexibility

• Offers enhanced flexibility in internal management and decision-making processes compared to private limited companies.

Limited Liability Partnerships: Registration in India

Establishing a Limited Liability Partnership (LLP) as a legally recognized business structure involves several crucial steps. Here is a brief and comprehensive outline of the LLP registration process.

1. Step 1: Obtain a DSC

• Obtain a Digital Signature Certificate (DSC) from Certifying agencies. To know more about the process, click here.

2. Step 2: Apply for Name Reservation

• Reserve an LLP's name via the LLP-RUN form, overseen by the Central Registration Centre. Up to two names can be proposed.

3. Submit the FiLLiP Form

• Fill out the FiLLiP form and submit it to the Registrar along with the Subscriber sheet and Director's consent (Form DIR-9).

4. Draft & File the LLP Agreement

• File the LLP Agreement using Form 3 on the MCA portal within 30 days of registration.

Upon approval of the FiLLiP Form by the Registrar of Companies (ROC), you will receive the Certificate of Incorporation, which has important details such as the LLP's name, registration number (LLPIN), date of incorporation, registered office address, and so on.

Example of LLPIN: AAA-1234

{{llp-cta}}

One Person Companies: Features

One Person Companies (OPCs) present a unique business structure where a single individual can establish and manage a company. Combining aspects of a Private Limited Company and the advantages of Sole Proprietorship, OPCs cater to entrepreneurs and business owners who handle all ownership, operation, and management duties themselves.

1. Sole Ownership

• An OPC is solely owned and managed by a single individual, referred to as the sole shareholder or member.

2. Limited Liability

• Like other corporate structures, OPCs offer limited liability protection to the sole owner.

3. Separate Legal Entity

• OPCs are recognized as separate legal entities independent of the sole owner. This legal distinction enables you to enter contracts, own assets, and participate in legal proceedings under your company’s name.

4. Perpetual Succession

• Despite having only one member, OPCs feature perpetual succession. A nominee appointed during incorporation typically assumes control in the absence of the sole member.

By combining limited liability, separate legal entity status, and simplified operations, OPCs emerge as an appealing choice for small businesses and startups led by single entrepreneurs.

One Person Company: Registration in India

Due to their similarities with private limited companies, OPCs also employ SPICe+ for their company registration process.

SPICe+ (Simplified Proforma for Incorporating Company Electronically Plus) is a comprehensive online form introduced by the Ministry of Corporate Affairs (MCA) in India to streamline and simplify the company registration process.

1. Step 1: Apply for DSC

• Obtain a Digital Signature Certificate (DSC) from any Certifying Agencies in India.

2. Step 2: Submit Part A of SPICe+ Form (If filled separately)

• Apply for name approval using Part A of the SPICe+ form, allowing for submission of up to two proposed names and one re-submission.

3. Step 3: Draft the MoA & AoA

• Draft the Memorandum of Association (MoA) and Articles of Association (AoA) detailing the company's objectives and rules.

4. Step 4: Submit Part B of SPICe+ Form

• Submit Part B of the SPICe+ form along with necessary documents, including DSC, MoA, AoA, and declarations. Pay the prescribed fee for registration.

5. Step 5: Appoint a Nominee

• Appoint a nominee director as required by OPC regulations.

6. Step 6: File for the Commencement of Business Certificate

• Within 180 days of incorporation, file for the Commencement of Business Certificate (Form INC-20A) with the Registrar of Companies.

Upon successful approval of the SPICe+ Form, you’ll receive an email notification from the MCA containing the Certificate of Incorporation (COI) and PAN and TAN details of the Company.

The certificate of Incorporation (COI) includes crucial details such as the Company Name, Registration Number (CIN), Date of Incorporation, Registered Office Address, Company Structure, and more.

{{opc-cta}}

For added clarity, check out our curated collection of sample templates, where you can download and customize most of these above-mentioned templates, as required.

Company Registration with Razorpay Rize

Razorpay Rize provides a wide array of services to facilitate an end-to-end streamlined company registration process, all at the lowest fees and without any hidden charges. Explore the different legal structures below to find the one that’s best for your business.

{{company-cards}}

Our package includes:

• Company Name Registration
• 2 Digital Signature Certificates (DSCs)
• 2 Directors’ Identification Numbers (DINs)
• Certificate of Incorporation(COI)
• MoA & AoA [Applicable for Private Limited Companies and OPCs]
• LLP Agreement [Applicable for LLPs]
• Company PAN & TAN

*Prices and documents can differ based on the company type.

Find Out Which Company Type to Register

If you operate a small business with limited resources, opting for LLP or OPC registration might be more favourable due to lighter compliance requirements. However, for larger businesses with substantial capital needs, registering as a Private Limited Company provides greater flexibility in raising funds. So, before proceeding with the registration of either a Private Limited Company, LLP, or OPC, it is essential to carefully evaluate the following factors.

• Business Nature and Size
• Fundraising Requirements
• Tax Implications
• Personal Liability Protection

Ultimately, the choice between a Private Limited Company, LLP, or OPC structure depends on the unique characteristics of your business, including its nature, size, fundraising requirements, tax implications, and personal liability protection.

Still confused about which company type to register with? We’ve got you covered! Introducing our latest tool - "Know Your Company Type."

For the first time in India, answer a quick set of questions about your startup, and this tool will utilize your responses to identify the perfect company registration type for you. Find your ideal fit with just one click!

{{know-your-company}}

In summary, choosing between Private Limited Companies, OPCs, and LLPs depends on your business goals and preferences. Each structure offers unique benefits, whether it's scalability with Private Limited Companies, convenience with OPCs, or simplicity with LLPs. If you have any unanswered questions or want to get started with the company registration process, feel free to get in touch with us!

‍

Importance of Business Licenses

Business licenses play a crucial role in India's business landscape for several reasons:

Legal Compliance

• Obtaining the necessary licenses ensures that businesses operate within the legal framework defined by government regulations.

Consumer Trust and Safety

• Certain licenses, such as FSSAI licenses for food-related businesses or health licenses for healthcare providers, signify compliance with safety and quality standards.

Public Health and Environmental Protection

• Licenses related to environmental clearances, waste management, and pollution control are essential for businesses to mitigate their environmental impact.

Taxation and Revenue Generation

• Business licenses, such as GST registration and professional tax registration, facilitate tax compliance and revenue generation for the Government.

Regulation of Market Competition

• Certain licenses, such as trade licenses and import-export licenses, regulate market entry and competition.

Employee Welfare and Labor Rights

• Labor licenses ensure that businesses adhere to labour laws and provide a safe and fair working environment for employees.

Last but certainly not least, business licenses are a badge of honour for your business. They show investors, partners, and customers that you're serious, professional, and committed to doing things the right way. In a crowded marketplace, that kind of credibility can make all the difference.

Common Types of Business Licenses in India

In India, obtaining the necessary business licenses depends on the type of business activity you intend to undertake and the location in which you plan to operate. Here are some common types of business licenses required in India:

Business Registration:

While not classified as a license, registering a business with the Ministry of Corporate Affairs (MCA) in India is a fundamental legal requirement if you are an entrepreneur establishing a business venture.

Depending on the type of business structure chosen, such as sole proprietorship, partnership, limited liability partnership (LLP), or private/public limited company, the eligibility criteria, registration process, and compliance obligations can vary significantly.

There are primarily following types of Business structures:

•  Private Limited Company

•  Limited Liability Partnerships

•  One Person Company

•  Public Limited Company

•  Sole Proprietorship

•  Partnership

Ultimately, registering your business with the MCA not only establishes its legal legitimacy but also lays the foundation for growth, credibility, and long-term success in the Indian startup ecosystem.

For detailed information regarding the eligibility criteria, registration process, and compliance obligations associated with different business structures, check out the link below.

Company Registration in India - Online Incorporation Process Explained

Udyam Registration - MSME License

Similarly, Udyam Registration is not technically a license. However, it provides recognition and certain benefits to Micro, Small, and Medium Enterprises (MSMEs) in India.

The eligibility criteria for Udyam Registration are based on the investment, turnover, years of establishment, etc.

Once registered as an MSME, you can receive a unique Udyam Registration Number (URN) and a certificate that gives access to government schemes, subsidies, and incentives.

GST Registration

In India, Goods and Services Tax (GST) registration is mandatory for businesses meeting certain turnover thresholds, which is Rs. 40 Lakhs (for goods) and Rs. 20 Lakhs (for services) or engaging in specified activities.

Here's an overview of the process of obtaining GST registration, which is not exactly a license but a crucial registration for businesses:

• Access the official GST portal.
• Fill out the registration form with accurate details regarding your business activities, turnover, and so on.
• Furnish the necessary information, including business details, PAN, Aadhaar, bank account details, and relevant documents.
• Upon successful verification, you will be issued a unique Goods and Services Tax Identification Number (GSTIN)- a 15-digit unique identifier for the businesses under the GST regime.

Professional Tax Registration

Professional Tax Registration is a requirement for employers and individuals engaged in certain professions, trades, or employment in India. It is a state-level tax levied by the respective State Governments for the welfare of professionals and workers in various sectors.

In some states like Maharashtra, obtaining professional tax registration is mandatory.

Shops and Establishment License

The Shops and Establishment License is a mandatory requirement for businesses operating within a specific jurisdiction, typically at the state level, in India. It is governed by the respective state Shops and Establishment Act and its rules, which vary slightly across different states.

The primary purpose of the Shops and Establishment License is to regulate the operations of shops, commercial establishments, and other businesses within a state with provisions related to-

• Working hours
• Welfare and safety of employees
• Employment practices

The Shops and Establishment License is usually valid for a specific period, after which it needs to be renewed to continue operating legally. A valid Shops and Establishment License is often required for various business activities, including obtaining other licenses, permits, or registrations.

Trade License

A trade license is a legal permit issued by the local municipal authority or council that authorizes your business to engage in specific commercial activities within a designated area or jurisdiction.
Trade licenses specify the types of commercial activities that a business is permitted to undertake. These activities may include manufacturing, trading, storage, distribution, or provision of certain services, depending on the nature of the business and local regulations.

In order to obtain a Trade license, you must submit an application to the local municipal authority or council responsible for issuing licenses. The application process typically requires businesses to provide certain documents, such as -

• Proof of identity,
• Address proof,
• Proof of ownership or tenancy of the premises
• Approvals and NOCs (No Objection Certificates) from relevant authorities

Once the application is approved and all requirements are met, the local authorities will issue the trade license to your business, specifying the permitted activities, duration of validity, and any conditions or restrictions.

Labour License

Labour licenses, also known as labour permits or labour registrations, are legal authorizations issued by government authorities (Shram Suvidha Portal) to businesses, particularly those employing a significant number of workers, to ensure compliance with labour laws and regulations.

It safeguards the rights and interests of workers by setting standards for fair treatment, safe working conditions, and adequate remuneration. These licenses often require businesses to adhere to minimum wage laws, working hour restrictions, overtime compensation, leave entitlements, and other labour standards aimed at promoting employee well-being.

The process of obtaining a labour license may vary depending on the jurisdiction and the specific requirements imposed by labour laws and regulations.

Food Safety and Standards Authority of India (FSSAI) License

The Food Safety and Standards Authority of India (FSSAI) license, commonly referred to as the FSSAI license, is a mandatory requirement for businesses involved in the manufacturing, processing, packaging, storage, distribution, and sale of food products in India.

Obtaining an FSSAI license is a legal requirement for food businesses operating in India. It is mandated by the Food Safety and Standards Act of 2006, and non-compliance can result in penalties, fines, or even closure of the business.

Depending on the scale and nature of the business, there are different types of FSSAI licenses, such as Basic Registration, State License, and Central License, each catering to specific business activities and turnover thresholds.

Import-Export License

An import-export license, also known as an import-export permit, is a legal authorization issued by government authorities that allows businesses to engage in the importation and/or exportation of goods across international borders.

An Importer Exporter Code is mandatory for the export and import of goods. It is a 10-digit identification number that is compulsory for the purpose of exporting from India as well as for the purpose of importing to India. It has lifetime validity.

The process to obtain an Import Export Code (IEC) registration certificate online involves several steps, as outlined below:

• Fill out the Application Form.
• Gather the necessary documents as per the requirements specified.
  • For Private Limited/ LLPs- Company PAN Card, Incorporation Certificate, Aadhar Card, PAN Card of all Directors/Partners, and Cancelled Cheque of the Company.
  • For Partnerships- Partnership Firm PAN Card, Partnership Deed, Aadhar Card, PAN Card of all Partners, and Cancelled Cheque of the Partnership Firm.
• Pay the required Fees.
• Upon successful verification and processing, the Import Export Code (IEC) registration certificate will be issued. You will receive the certificate electronically using the registered email ID provided during the application process.

While we covered some common licenses necessary for businesses in India, certain industry-specific licenses and permits exist that are crucial for compliance with sector-specific laws, regulations, and standards. These can vary widely depending on the nature of the industry, the type of activities involved, and the potential risks or impacts associated with the operations.

Business Registration with Razorpay Rize

To conclude, securing these licenses is crucial for the seamless operation of your business. However, it's essential to prioritize registering your business as a legal entity beforehand, as this step is often a prerequisite for applying for most of these licenses.

Razorpay Rize simplifies this fundamental yet vital aspect of the process with its online company registration services. To learn more about how Razorpay Rize can assist you, click below.

{{business-cta}}

‍

*Prices and documents can differ based on the company type.